Z573M (dismantling)
11,90 $
Z573M nixie tube, glow discharge indicator. Display digits 0..9 and dot. High brightness and contrast of the image, low power consumption. Manufacturer: RFT (VEB Funkwerk Erfurt) . Pre-Owned.
Place an order to find out the cost of delivery to your country
To receive an invoice - Online payment by Bank card or PayPal, provide email
45 in stock
The Z573M gas discharge indicators are used in calculating and solving devices, in various measuring instruments and other discrete-action equipment, for visual representation of output data.
Displayed symbols: 0..9 and “dot” . Symbol height: 13mm (0.51″). Dimensions: Ø19 mm × 47.5 mm.
Equivalent to indicator tubes: IN-14, IN-8, IN-8-2, Z570M.
Technical specifications:
Voltage:
- Power supply – at least: 200V
- Occurrence of discharge – no more than: 170V
- Maintaining the discharge – no more than: 140V
Working current:
- Constant – from 2mA to 2.5mA
- When powered from a pulsating voltage source with a frequency of 50Hz: 1mA
- Indication current is not more than: 2.5mA
- Brightness is at least: 100cd/m²
Cathode driver: 74141 or K155ID1 high-voltage BCD decoder (converts 4-bit input to one of 10 cathodes). Anode driver: High-voltage transistors such as MPSA42 (NPN) and MPSA92 (PNP) for switching the high-voltage supply. Practical current limiting: For a 170..180V supply driving Z573M at 2..2.5 mA, use a 10..12kOhm anode resistor . This should be verified by actual measurement for your specific circuit and desired brightness.
- Product service life: Nixie tubes operated at steady drive current typically last 5,000–10,000 hours of active display time.
| Weight | 0,015 kg |
|---|---|
| Dimensions | 4,75 × 1,9 × 1,9 cm |
| Brand | RFT |
| Packaging | Product from factory group packaging |
| Socket type | non, flexible contacts |
| Condition | Used product |
1 review for Z573M (dismantling)
You may also like…
IN-17
IN-14
IN-18
IN-8-2
Recomended products
IV-22
The IV-22 (IV-22 rus.) is a Soviet single-digit vacuum fluorescent tube with a 7-segment blue-green display. It has a 12-pin connector, a filament voltage of 1.2V, and an anode voltage of 27V. It is used for edge mounting in Nixie Clocks, meters, and other DIY projects. Manufacturer: "REFLECTOR" (Saratov, USSR). NOS.

Verified owner N Roberts (verified owner) –
Great service and excellent tubes! I had no difficulty in cleaning off the red lacquer by soaking the tubes in warm soapy water (I left the little bit of red on the top glass seal). I then soldered each of the 6 tubes I bought to the PCB headers that fit my Nixie clock and they all work beautifully. I am very happy with them.