6N23P-EV Matched Pair
Original price was: 140,00 $.126,00 $Current price is: 126,00 $.
Matched pair of 6N23P-EV vacuum tubes are high-quality, reliable preamplifier tubes for Hi-Fi amplifiers and phono preamps. They are a direct replacement for 6922, E88CC, and 6DJ8 tubes. Their low noise makes them ideal for upgrading preamps, phono preamps, DACs, and headphone amplifiers. Manufacturer: REFLECTOR (Saratov, USSR) / NOS.
Each pair is tested on a digital tube tester. Matched within 5%. You will receive a report with the measured parameters.
Place an order to find out the cost of delivery to your country
To receive an invoice - Online payment by Bank card or PayPal, provide email
6 in stock
The 6N23P-EV (6H23П-ЕВ rus.) tube – universal double triode with separate cathodes and low noise level. Designed to work as a broadband amplifier and high-frequency mixer in circuits of low-power amplifiers and pulse generators. Works in any position. Manufacturer: REFLECTOR (Saratov, USSR) / NOS.
Socket: Noval (B9A) 9-pin.
Direct replacement for 6922, E88CC, 6DJ8. Close equivalents: ECC88, PCC88, UCC88, E188CC.
E – increased durability;
V – a tube with increased reliability and mechanical strength.
Stamp of technical control department of the manufacturer ” ОТК “
Technical specifications:
- Filament voltage: 6.3 ± 0.6V
- Filament current: 310 ± 25mA
- Anode voltage nominal (constant): 100V
- Anode voltage limit (constant): 300V
- Anode current of each triode: 15mA
- Cathode current limit: 20mA
- Cathode current limit (pulse amplitude): 200mA
- Grid voltage (DC): 9V
- Grid voltage limit (pulse amplitude): 260V
- Power dissipated by the anode: limiting 1.8W
- Power dissipated by the grid: limit 0.03W
- The voltage between the cathode and the heater is limiting (constant): -200V
- Slope per triode: 12.7mA/V
- Gain of each triode: 34 ± 9
- Input impedance at 200MHz: 500Ohm
- Equivalent tube noise resistance: 300Ohm
- Cathode resistance for automatic bias: 680Ohm
- Resistance in the grid circuit limit: 1MOhm
Operating time not less than 5000 hours.
| Weight | 0,04 kg |
|---|---|
| Dimensions | 5,7 × 2,25 × 2,25 cm |
| Brand | REFLECTOR |
| Packaging | Product from factory group packaging |
| Socket type | 9 – Pin: Noval B9A / PLK-9 / PL-9 |
| Condition | New product |
You may also like…
6S45P-E Matched Pair
Matched pair of 6S45P-E tubes — high-quality, high-transconductance (high-slope) triode. Extremely low noise and high current capability make it an ideal driver for single-stage single-ended (SE) amplifiers and headphone amps. Direct replacement for WE437A and 6S15P. Manufacturer: REFLECTOR (Saratov) / NOS
Each pair is tested on a digital tube tester—you will receive a report with the measured parameters.
6N6P Matched Pair
A matched pair of 6N6P tubes - high-quality dual triode with a gold grid. Designed for low-frequency enhancement, they are ideal as drivers in single-ended (SE) and headphone amplifiers. Equivalent to ECC99 and E182CC. Manufacturer: NEVZ (Novosibirsk) / NOS
Each pair is tested on a digital tube tester—you will receive a report with the measured parameters.
6N6P Matched Quad
A matched quad of 6N6P tubes - high-quality dual triode with a gold grid. Designed for low-frequency enhancement, they are ideal as drivers in single-ended (SE) and headphone amplifiers. Equivalent to ECC99 and E182CC. Manufacturer: NEVZ (Novosibirsk) / NOS
Each quad is tested on a digital tube tester—you will receive a report with the measured parameters.
6N2P-EV Matched Pair
6N2P-EV matched pair — military-grade dual triode with low microphony and high gain (µ ≈ 100). Perfect for preamp stages in guitar amps and hi-fi equipment. Manufacturer: VOSKHOD (Rocket logo) / NOS. Replacement: 12AX7, ECC83, 7025 (⚠️ requires 6.3V heater rewiring — not a direct drop-in!).
Each pair is tested on a digital tube tester—you will receive a report with the measured parameters.
Recomended products
5C3S (black plate)
Reviews
There are no reviews yet.