Description
The 6N2P-EV tube are a replacement for 12AX7 in any typical amp application, but they have 6.3V heater voltage and would need a different wiring than stock 12AX7’s. Designed to amplify low frequency voltage. It is used in pre-amplification cascades on resistances.
Near equivalent: 12AX7, ECC83
E – characterizing the increased durability of the tube;
V – tube with increased reliability and mechanical strength.
- Stamp of technical control department of the manufacturer ” ОТК “
Technical specifications:
- Filament voltage: 6.3 ± 0.6V
- Filament current: 340 ± 25mA
- Anode voltage nominal (constant): 250V
- Anode voltage limit (constant): 300V
- Anode current of each triode: 2.3 ± 0.9mA
- The cathode current of each triode is limiting: 10mA
- Grid voltage (constant): -1.5V
- Reverse grid current of each triode: 0.2μA
- Power dissipated by each anode: limit 1W
- The voltage between the cathode and the heater limit (constant): 100V
- Voltage between anodes no more than: 2V
- Slope of each triode: 2.1 ± 0.5mA/V
- Gain of each triode: 97.5 ± 17.5
- Resistance in the grid circuit is limiting: 0.5MOhm
Operating time not less than 5000 hours.
marius.nedelcu (verified owner) –
I am from Romania and I bought 10 types of vacuum tubes (including 6N2P-EV) from this seller and a total of 26 tubes. All the tubes correspond to the description, and the seller also offered me a discount of $24 for the value of the entire shopping basket.
I have been communicating with this seller frequently for one year and he has been helpful for me in shipping other similar products from Russia.
He is also an experienced Ebay seller.