6N1P-VI

The 6N1P-VI is a long life miniature 9-pin medium gain dual triode vacuum tube used as a line audio amplifier and cathode driver. Each tube contains 1.408 mg of gold.

Except for higher heater current, it’s a direct plug-in replacement for the 6DJ8, ECC88 and 6922.

The 6N1P-VI feature very low distortion, medium transconductance, higher plate voltage and dissipation rating than 6DJ8. Internally shielded between sections, 6N1P-VI can be perfectly used at differing signal levels. A larger cathode than 6DJ8 types gives 6N1P-VI longer life and more transient current capability.

Near equivalent: 6DJ8, ECC88, 6922

V – tube with increased reliability and mechanical strength;
I – tube designed to operate in a pulsed mode.

• Military acceptance stamp ” B☆П “
• Stamp of technical control department of the manufacturer ” ОТК “

Technical specifications:

• Filament voltage: 6.3 ± 0.6V 
• Filament current: 600 ± 50mA 
• Anode voltage nominal: (constant) 250V 
• Anode voltage limit: (constant) 300V 
• Anode current of each triode: 7.5 ±1.5mA 
• The cathode current of each triode is limiting: 25mA 
• Grid voltage at anode current 10 μA: -20V 
• Reverse grid current: 0.5uA 
• Voltage between the cathode and the heater limit: (constant) 250V 
• Power dissipated by each anode: maximum 2.2W 
• Slope of each triode: 4.45 ± 0.65mA/V 
• The voltage between the anodes: not more than 2.5V 
• Gain of each triode: 35 ± 7 
• Resistance in the circuit of each cathode for automatic bias: 600Ohm 
• Resistance in the grid circuit limit: 1MOhm

Operating time not less than 5000 hours.