6S45P-E Matched Quad
140,00 $
Matched quad of 6S45P-E tubes — high-quality, high-transconductance (high-slope) triode. Extremely low noise and high current capability make it an ideal driver for single-stage single-ended (SE) amplifiers and headphone amps. Direct replacement for WE437A and 6S15P. Manufacturer: REFLECTOR (Saratov) / NOS
Each quad is tested on a digital tube tester—you will receive a report with the measured parameters.
Place an order to find out the cost of delivery to your country
To receive an invoice - Online payment by Bank card or PayPal, provide email
3 in stock
The 6S45P-E (6C45П-Е rus.) high-frequency triode of increased durability, designed to amplify high-frequency voltage in broadband amplifier circuits for general and special purposes. Works in any position. Base 9-pin.
Manufacturer: REFLECTOR (Saratov) / NOS.
The 6S45P-E tube is equivalent to the WE437 and 6S15P tubes.
E – characterizing the increased durability of the tube
- Stamp of technical control department of the manufacturer ” ОТК “
Technical specifications:
- Heating voltage: 6.3V ± 0.6V
- Heating current: 440mA ± 30mA
- Anode voltage: 150V
- Current in the anode circuit: 40mA ± 12mA
- Slope of characteristic: 45mA/V ± 11mA/V
- Input resistance: 3.5Mohm
- Equivalent noise resistance: 100Ohm
- Reverse grid current: not more than 0.3μA
Maximum allowable electrical values:
- The highest voltage on the anode: 150V
- The highest current in the cathode circuit: 52mA
- Maximum power dissipated at the anode: 7.8W
- The highest voltage in the cathode-heater circuit: 100V
- The greatest resistance in the grid circuit: 0.15Mohm
Minimum operating time – 3000 hours.
| Weight | 0,06 kg |
|---|---|
| Dimensions | 5,7 × 2,25 × 2,25 cm |
| Brand | REFLECTOR |
| Packaging | Product from factory group packaging |
| Socket type | 9 – Pin: Noval B9A / PLK-9 / PL-9 |
| Condition | New product |
You may also like…
6N6P Matched Pair
A matched pair of 6N6P tubes - high-quality dual triode with a gold grid. Designed for low-frequency enhancement, they are ideal as drivers in single-ended (SE) and headphone amplifiers. Equivalent to ECC99 and E182CC. Manufacturer: NEVZ (Novosibirsk) / NOS
Each pair is tested on a digital tube tester—you will receive a report with the measured parameters.
6N2P-EV Matched Pair
6N2P-EV matched pair — military-grade dual triode with low microphony and high gain (µ ≈ 100). Perfect for preamp stages in guitar amps and hi-fi equipment. Manufacturer: VOSKHOD (Rocket logo) / NOS. Replacement: 12AX7, ECC83, 7025 (⚠️ requires 6.3V heater rewiring — not a direct drop-in!).
Each pair is tested on a digital tube tester—you will receive a report with the measured parameters.
6P15P-ER (original box)
Recomended products
6J1P-EV
5C3S
Reviews
There are no reviews yet.