6P3S-E
Original price was: 17,90 $.16,90 $Current price is: 16,90 $.
Russian electron tube 6P3S-E REFLECTOR factory, output beam tetrode. Best quality, the sound is nice – authentic vintage tone. Near equivalent: 6L6, 6L6GT, 6L6GC and 5881
Place an order to find out the cost of delivery to your country
Link your VISA card to your PayPal account
75 in stock
Description
The 6P3S-E is an output beam tetrode with an octal base designed to operate in the output stages of low-frequency power amplifiers. It is used in the output single-cycle and push-pull cascades of low-frequency receivers and amplifiers. It can be used as a high-frequency generator, transmitters and other general purpose equipment. Indirectly heated oxide cathode. Works in any position.
Equivalent to tubes: 6L6, 6L6GT, 6L6GC, 5881
- Stamp of technical control department of the manufacturer ” ОТК “
Technical specifications:
- Filament voltage: 6.3 ± 0.6V
- Filament current: 900 ± 60mA
- Anode voltage nominal: 250V
- Anode voltage limit: 400V
- Anode current: 72 ± 14mA
- Grid voltage of the first: -14V
- Reverse current grid first: 3.0uA
- Grid voltage second nominal: 250V
- Grid voltage second limit: 300V
- Grid current second: 8mA
- Power dissipated by the anode, limiting: 20.5W
- Power dissipated by the second grid, limit: 2.75W
- The voltage between the cathode and the heater limit: 200V
- Slope: 6 ± 0.8mA/V
- Output power: 5.4W
- Resistance in the grid circuit of the first limit: 0.5 MOhm
- Input capacitance: 11 ± 2pF
- Output capacitance: 8.2 ± 1.5pF
- Capacitance pass: 1pF
Operating time not less than 5000 hours
Additional information
| Weight | 0,062 kg |
|---|---|
| Dimensions | 10,9 × 3,8 × 3,8 cm |
| Brand |
REFLECTOR |
| Packaging |
Product from factory group packaging |
| Socket type |
8 – Pin RSH5-1, PL8-1P, PL8-2P, PL8-3P. |
| Condition |
New product |
Reviews
There are no reviews yet.