6P3S
7,50 $
Russian tube 6P3S REFLECTOR factory, output beam tetrode. Best quality, the sound is nice – authentic vintage tone. Near equivalent: 6L6, 6L6GT, 6L6GC and 5881
Place an order to find out the cost of delivery to your country
Link your VISA card to your PayPal account
240 in stock
Description
The 6P3S is an output beam tetrode tube with an octal base designed to operate in the output stages of low-frequency power amplifiers. It is used in the output single-cycle and push-pull cascades of low-frequency receivers and amplifiers. It can be used as a high-frequency generator, transmitters and other general purpose equipment. Indirectly heated oxide cathode. Works in any position.
Near equivalent to tubes: 6L6, 6L6GT, 6L6GC and 5881
Technical specifications:
- Filament voltage: 6.3 ± 0.6V
- Filament current: 900 ± 60mA
- Anode voltage nominal: 250V
- Anode voltage limit: 400V
- Anode current: 72 ± 14mA
- Grid voltage of the first: -14V
- Reverse current grid first: 3.0uA
- Grid voltage second nominal: 250V
- Grid voltage second limit: 300V
- Grid current second: 8mA
- Power dissipated by the anode, limiting: 20.5W
- Power dissipated by the second grid, limit: 2.75W
- The voltage between the cathode and the heater limit: 200V
- Slope: 6 ± 0.8mA/V
- Output power: 5.4W
- Resistance in the grid circuit of the first limit: 0.5MOhm
- Input capacitance: 11 ± 2pF
- Output capacitance: 8.2 ± 1.5pF
- Capacitance pass: 1pF
Operating time not less than 2000 hours
Additional information
| Weight | 0,062 kg |
|---|---|
| Dimensions | 10,9 × 3,8 × 3,8 cm |
| Brand |
REFLECTOR |
| Packaging |
Product from factory group packaging |
| Socket type |
8 – Pin RSH5-1, PL8-1P, PL8-2P, PL8-3P. |
| Condition |
New product |
Reviews
There are no reviews yet.