Description
The 6P18P output pentode is designed for amplification of low-frequency power and can be used in vertical scanning output stages. Cathode oxide, indirect heating. Works in any position.
Base -9 pin.
Full equivalent of EL82 tube, close analog of EL84 tube
- Stamp of technical control department of the manufacturer ” ОТК “
Technical specifications:
- Filament voltage: 6.3 ± 0.6V
- Filament current: 0.76 ± 0.06A
- Anode voltage nominal (constant): 180V
- Anode voltage limit (constant): 250V
- Maximum anode voltage (pulse amplitude): 2500V
- The smallest anode voltage (pulse amplitude): -500V
- Anode current: 53 ± 9mA
- Cathode current limit: 75mA
- Grid voltage second nominal (constant): 180V
- Grid voltage second limit (constant): 250V
- Second grid current: no more than 10.5mA
- Power dissipated by the anode, limit: 12W
- Power dissipated by the second grid, limit: 2.5W
- The voltage between the cathode and the heater limit (constant): 100V
- The slope of the characteristic: not less than 8.8mA/V
- Internal resistance: 22kOhm
- Triode gain: 13
- Output power: not less than 2.2W
- THD: 8%
- Cathode resistance for automatic bias: 110Ohm
- Input capacitance: 11.5pF
- Output capacitance: 6pF
- Capacitance through: 0.2pF
Operating time not less than 3000 hours.
Reviews
There are no reviews yet.